Zigbee funktioniert nach Reboot nicht

  • Grüß Euch,

    ärgere mich seit einer geschlagenen Woche damit und bin schon recht verzweifelt. Mein Zigbee Stick (CC2531) funktioniert, alle Sensoren werden erkannt. Aber: Nach einem Reboot liefert "ls -la /dev/serial/by-id"

    ls: Zugriff auf '/dev/serial/by-id' nicht möglich: Datei oder Verzeichnis nicht gefunden

    Ich habe keine Chance mehr ihn zum laufen zu bringen. Auch abstecken des Sticks, Reboot, anstecken......


    Restore ich das Image das ich Gott sei dank gemacht habe läuft er wieder - aber nur bis zum nächsten Reboot.


    JS controller: 3.1.4

    Node.js: v10.20.1

    Bei höheren Versionen das selbe Problem.

    Raspberry 4 mit Raspian light buster

    Fixer habe ich schon gemacht, NPM auch neu installiert. Bin leider kein Linuxler und habe mich durch viele Foren gekämpft aber leider ohne Erfolg. Wäre über jede Hilfe dankbar.

    Wolfgang

  • Hallo,

    könntest du deinen Stick anstecken und dann den Befehl dmesg ausführen?

    Wenn der Stick angesteckt ist bitte noch ls -lR /dev/serial asführen.

    Die Ausgaben der beiden Befehle bitte Posten

    Mit freundlichen Grüßen Leon



    :!:Alle Fehler in diesem Post sind beabsichtigt, um den Unterhaltungswert des Inhalts für Sie zu steigern:!:


    Es gibt nichts langweiligeres als ein komplettes und funktionierendes System8o

    Kommt auch aufs: XiaomiForum



  • Hallo Leon,


    danke für Deine Antwort (und sorry für mein spätes Antworten. Mit funktionsfähigem Stick ergebendeine Befehle:


    pi@raspberrypi:~ $ sudo dmesg

    [ 0.000000] Booting Linux on physical CPU 0x0

    [ 0.000000] Linux version 4.19.97-v7l+ (dom@buildbot) (gcc version 4.9.3 (cro sstool-NG crosstool-ng-1.22.0-88-g8460611)) #1294 SMP Thu Jan 30 13:21:14 GMT 20 20

    [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d

    [ 0.000000] CPU: div instructions available: patching division code

    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

    [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2

    [ 0.000000] Memory policy: Data cache writealloc

    [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000

    [ 0.000000] On node 0 totalpages: 1012736

    [ 0.000000] DMA zone: 1728 pages used for memmap

    [ 0.000000] DMA zone: 0 pages reserved

    [ 0.000000] DMA zone: 196608 pages, LIFO batch:63

    [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63

    [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0

    [ 0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632

    [ 0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096

    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

    [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008

    [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma =256M smsc95xx.macaddr=DC:A6:32:7D:C2:47 vc_mem.mem_base=0x3ec00000 vc_mem.mem_ size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=abcdabcd-02 roo tfstype=ext4 elevator=deadline fsck.repair=yes rootwait

    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

    [ 0.000000] Memory: 3735564K/4050944K available (8192K kernel code, 687K rwda ta, 2408K rodata, 2048K init, 850K bss, 53236K reserved, 262144K cma-reserved, 3 264512K highmem)

    [ 0.000000] Virtual kernel memory layout:

    vector : 0xffff0000 - 0xffff1000 ( 4 kB)

    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

    vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)

    lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)

    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

    .text : 0x(ptrval) - 0x(ptrval) (10208 kB)

    .init : 0x(ptrval) - 0x(ptrval) (2048 kB)

    .data : 0x(ptrval) - 0x(ptrval) ( 688 kB)

    .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB)

    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

    [ 0.000000] ftrace: allocating 28692 entries in 85 pages

    [ 0.000000] rcu: Hierarchical RCU implementation.

    [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

    [ 0.000000] GIC: Using split EOI/Deactivate mode

    [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).

    [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns

    [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 43980 46511102ns

    [ 0.000022] Switching to timer-based delay loop, resolution 18ns

    [ 0.000250] Console: colour dummy device 80x30

    [ 0.000703] console [tty1] enabled

    [ 0.000759] Calibrating delay loop (skipped), value calculated using timer fr equency.. 108.00 BogoMIPS (lpj=540000)

    [ 0.000795] pid_max: default: 32768 minimum: 301

    [ 0.001079] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [ 0.001111] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [ 0.001890] CPU: Testing write buffer coherency: ok

    [ 0.002316] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    [ 0.002980] Setting up static identity map for 0x200000 - 0x20003c

    [ 0.003153] rcu: Hierarchical SRCU implementation.

    [ 0.004033] smp: Bringing up secondary CPUs ...

    [ 0.004859] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

    [ 0.005798] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

    [ 0.006698] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

    [ 0.006834] smp: Brought up 1 node, 4 CPUs

    [ 0.006898] SMP: Total of 4 processors activated (432.00 BogoMIPS).

    [ 0.006921] CPU: All CPU(s) started in HYP mode.

    [ 0.006941] CPU: Virtualization extensions available.

    [ 0.007744] devtmpfs: initialized

    [ 0.017946] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0

    [ 0.018180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns

    [ 0.018222] futex hash table entries: 1024 (order: 4, 65536 bytes)

    [ 0.025733] pinctrl core: initialized pinctrl subsystem

    [ 0.026603] NET: Registered protocol family 16

    [ 0.029506] DMA: preallocated 1024 KiB pool for atomic coherent allocations

    [ 0.030944] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

    [ 0.030976] hw-breakpoint: maximum watchpoint size is 8 bytes.

    [ 0.031187] Serial: AMBA PL011 UART driver

    [ 0.034270] bcm2835-mbox fe00b880.mailbox: mailbox enabled

    [ 0.050030] raspberrypi-firmware soc:firmware: Attached to firmware from 2020 -02-12 12:36, variant start

    [ 0.060045] raspberrypi-firmware soc:firmware: Firmware hash is c3c8dbdf14768 6fb0c3f32aece709d0653368810

    [ 0.103010] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dma chans=0x1

    [ 0.106241] vgaarb: loaded

    [ 0.106610] SCSI subsystem initialized

    [ 0.106827] usbcore: registered new interface driver usbfs

    [ 0.106895] usbcore: registered new interface driver hub

    [ 0.106978] usbcore: registered new device driver usb

    [ 0.108204] clocksource: Switched to clocksource arch_sys_counter

    [ 0.186853] VFS: Disk quotas dquot_6.6.0

    [ 0.186953] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

    [ 0.187110] FS-Cache: Loaded

    [ 0.187289] CacheFiles: Loaded

    [ 0.187820] simple-framebuffer: probe of 0.framebuffer failed with error -12

    [ 0.195670] NET: Registered protocol family 2

    [ 0.196349] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

    [ 0.196397] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

    [ 0.196478] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

    [ 0.196563] TCP: Hash tables configured (established 8192 bind 8192)

    [ 0.196706] UDP hash table entries: 512 (order: 2, 16384 bytes)

    [ 0.196750] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

    [ 0.196981] NET: Registered protocol family 1

    [ 0.197577] RPC: Registered named UNIX socket transport module.

    [ 0.197602] RPC: Registered udp transport module.

    [ 0.197624] RPC: Registered tcp transport module.

    [ 0.197645] RPC: Registered tcp NFSv4.1 backchannel transport module.

    [ 0.197674] PCI: CLS 0 bytes, default 64

    [ 0.200700] Initialise system trusted keyrings

    [ 0.200884] workingset: timestamp_bits=14 max_order=20 bucket_order=6

    [ 0.209903] FS-Cache: Netfs 'nfs' registered for caching

    [ 0.210436] NFS: Registering the id_resolver key type

    [ 0.210477] Key type id_resolver registered

    [ 0.210499] Key type id_legacy registered

    [ 0.210535] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

    [ 0.212801] Key type asymmetric registered

    [ 0.212827] Asymmetric key parser 'x509' registered

    [ 0.212950] bounce: pool size: 64 pages

    [ 0.213004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 50)

    [ 0.213188] io scheduler noop registered

    [ 0.213212] io scheduler deadline registered (default)

    [ 0.213384] io scheduler cfq registered

    [ 0.213408] io scheduler mq-deadline registered (default)

    [ 0.213431] io scheduler kyber registered

    [ 0.244536] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, thres hold 0x00000000c0000000

    [ 0.244583] brcm-pcie fd500000.pcie: could not get clock

    [ 0.244660] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:

    [ 0.244713] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf800 0000

    [ 0.298241] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)

    [ 0.298572] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00

    [ 0.298604] pci_bus 0000:00: root bus resource [bus 00-01]

    [ 0.298633] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])

    [ 0.298702] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400

    [ 0.298840] pci 0000:00:00.0: PME# supported from D0 D3hot

    [ 0.301557] PCI: bus0: Fast back to back transfers disabled

    [ 0.301588] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), rec onfiguring

    [ 0.301813] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330

    [ 0.301938] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]

    [ 0.302254] pci 0000:01:00.0: PME# supported from D0 D3cold

    [ 0.304993] PCI: bus1: Fast back to back transfers disabled

    [ 0.305023] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01

    [ 0.305070] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]

    [ 0.305104] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64 bit]

    [ 0.305193] pci 0000:00:00.0: PCI bridge to [bus 01]

    [ 0.305222] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]

    [ 0.305460] pcieport 0000:00:00.0: enabling device (0140 -> 0142)

    [ 0.305648] pcieport 0000:00:00.0: Signaling PME with IRQ 53

    [ 0.305820] pcieport 0000:00:00.0: AER enabled with IRQ 53

    [ 0.306001] pci 0000:01:00.0: enabling device (0140 -> 0142)

    [ 0.310101] iproc-rng200 fe104000.rng: hwrng registered

    [ 0.310336] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000 000(1024 MiB)

    [ 0.310857] vc-sm: Videocore shared memory driver

    [ 0.311260] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe2 00000

    [ 0.321520] brd: module loaded

    [ 0.331157] loop: module loaded

    [ 0.331911] Loading iSCSI transport class v2.0-870.

    [ 0.333674] libphy: Fixed MDIO Bus: probed

    [ 0.334105] bcmgenet fd580000.genet: failed to get enet clock

    [ 0.334136] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000

    [ 0.334166] bcmgenet fd580000.genet: failed to get enet-wol clock

    [ 0.334196] bcmgenet fd580000.genet: failed to get enet-eee clock

    [ 0.334232] bcmgenet: Skipping UMAC reset

    [ 0.334474] unimac-mdio unimac-mdio.-19: DMA mask not set

    [ 0.358230] libphy: bcmgenet MII bus: probed

    [ 0.398755] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrva l)

    [ 0.399685] usbcore: registered new interface driver r8152

    [ 0.399767] usbcore: registered new interface driver lan78xx

    [ 0.399835] usbcore: registered new interface driver smsc95xx

    [ 0.400150] xhci_hcd 0000:01:00.0: xHCI Host Controller

    [ 0.400194] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 1

    [ 0.402463] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 qu irks 0x0000001000000890

    [ 0.402817] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of ir q 54

    [ 0.403647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 4.19

    [ 0.403681] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1

    [ 0.403710] usb usb1: Product: xHCI Host Controller

    [ 0.403733] usb usb1: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd

    [ 0.403757] usb usb1: SerialNumber: 0000:01:00.0

    [ 0.404281] hub 1-0:1.0: USB hub found

    [ 0.404375] hub 1-0:1.0: 1 port detected

    [ 0.404865] xhci_hcd 0000:01:00.0: xHCI Host Controller

    [ 0.404901] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2

    [ 0.404937] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed

    [ 0.405366] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 4.19

    [ 0.405400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1

    [ 0.405428] usb usb2: Product: xHCI Host Controller

    [ 0.405451] usb usb2: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd

    [ 0.405475] usb usb2: SerialNumber: 0000:01:00.0

    [ 0.405968] hub 2-0:1.0: USB hub found

    [ 0.406036] hub 2-0:1.0: 4 ports detected

    [ 0.407261] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

    [ 0.407468] dwc_otg: FIQ enabled

    [ 0.407476] dwc_otg: NAK holdoff enabled

    [ 0.407485] dwc_otg: FIQ split-transaction FSM enabled

    [ 0.407497] Module dwc_common_port init

    [ 0.407698] usbcore: registered new interface driver uas

    [ 0.407809] usbcore: registered new interface driver usb-storage

    [ 0.408003] mousedev: PS/2 mouse device common for all mice

    [ 0.409225] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

    [ 0.410676] sdhci: Secure Digital Host Controller Interface driver

    [ 0.410702] sdhci: Copyright(c) Pierre Ossman

    [ 0.411098] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe

    [ 0.411498] sdhci-pltfm: SDHCI platform and OF driver helper

    [ 0.414503] ledtrig-cpu: registered to indicate activity on CPUs

    [ 0.414672] hidraw: raw HID events driver (C) Jiri Kosina

    [ 0.414814] usbcore: registered new interface driver usbhid

    [ 0.414837] usbhid: USB HID core driver

    [ 0.415614] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

    [ 0.417381] [vc_sm_connected_init]: start

    [ 0.426252] [vc_sm_connected_init]: end - returning 0

    [ 0.427416] Initializing XFRM netlink socket

    [ 0.427458] NET: Registered protocol family 17

    [ 0.427567] Key type dns_resolver registered

    [ 0.427833] Registering SWP/SWPB emulation handler

    [ 0.428490] registered taskstats version 1

    [ 0.428521] Loading compiled-in X.509 certificates

    [ 0.435463] uart-pl011 fe201000.serial: cts_event_workaround enabled

    [ 0.435544] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2

    [ 0.440594] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive r

    [ 0.441153] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor d river

    [ 0.441807] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0

    [ 0.441834] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated

    [ 0.467868] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3

    [ 0.467985] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4

    [ 0.484280] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

    [ 0.485889] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.487492] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.490362] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

    [ 0.491967] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.500893] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using A DMA

    [ 0.503402] of_cfs_init

    [ 0.503509] of_cfs_init: OK

    [ 0.504110] Waiting for root device PARTUUID=abcdabcd-02...

    [ 0.542023] random: fast init done

    [ 0.559274] mmc1: new high speed SDIO card at address 0001

    [ 0.617919] mmc0: new ultra high speed DDR50 SDHC card at address aaaa

    [ 0.619319] mmcblk0: mmc0:aaaa SM32G 29.7 GiB

    [ 0.620996] mmcblk0: p1 p2

    [ 0.768247] usb 1-1: new high-speed USB device number 2 using xhci_hcd

    [ 0.950940] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcd Device= 4.21

    [ 0.950975] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

    [ 0.951002] usb 1-1: Product: USB2.0 Hub

    [ 0.952563] hub 1-1:1.0: USB hub found

    [ 0.952900] hub 1-1:1.0: 4 ports detected

    [ 1.148554] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd

    [ 1.185765] usb 2-2: New USB device found, idVendor=2109, idProduct=0715, bcd Device= 1.48

    [ 1.185799] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

    [ 1.185826] usb 2-2: Product: VLI Product String

    [ 1.185849] usb 2-2: Manufacturer: VLI Manufacture String

    [ 1.185872] usb 2-2: SerialNumber: 000000012345

    [ 1.205739] scsi host0: uas

    [ 1.224974] scsi 0:0:0:0: Direct-Access WDC WDS5 00G2B0B-00YS X611 PQ : 0 ANSI: 6

    [ 1.228308] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

    [ 1.228517] sd 0:0:0:0: [sda] Write Protect is off

    [ 1.228545] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00

    [ 1.228888] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA

    [ 1.229719] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes

    [ 1.278250] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd

    [ 1.309145] sda: sda1 sda2

    [ 1.313097] sd 0:0:0:0: [sda] Attached SCSI disk

    [ 1.416799] usb 1-1.4: New USB device found, idVendor=0451, idProduct=16a8, b cdDevice= 0.09

    [ 1.416836] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber =3

    [ 1.416866] usb 1-1.4: Product: TI CC2531 USB CDC

    [ 1.416890] usb 1-1.4: Manufacturer: Texas Instruments

    [ 1.416914] usb 1-1.4: SerialNumber: __0X00124B00193B1505

    [ 1.492129] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

    [ 1.492200] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.

    [ 1.498043] devtmpfs: mounted

    [ 1.506140] Freeing unused kernel memory: 2048K

    [ 1.506397] Run /sbin/init as init process

    [ 1.882646] systemd[1]: System time before build time, advancing clock.

    [ 1.975097] NET: Registered protocol family 10

    [ 1.976346] Segment Routing with IPv6

    [ 2.002834] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id)

    [ 2.003555] systemd[1]: Detected architecture arm.

    [ 2.017127] systemd[1]: Set hostname to <raspberrypi>.

    [ 2.629433] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.651942] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.657341] systemd[1]: Created slice system-getty.slice.

    [ 2.672683] systemd[1]: Condition check resulted in Journal Audit Socket bein g skipped.

    [ 2.672810] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.674323] systemd[1]: Created slice system-openvpn.slice.

    [ 2.675254] systemd[1]: Listening on udev Kernel Socket.

    [ 2.676255] systemd[1]: Listening on Journal Socket (/dev/log).

    [ 2.677957] systemd[1]: Created slice User and Session Slice.

    [ 2.678826] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch.

    [ 3.425118] EXT4-fs (sda2): re-mounted. Opts: (null)

    [ 3.534885] systemd-journald[104]: Received request to flush runtime journal from PID 1

    [ 3.973301] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Reg isters at 0xfeb00000 length 0x0000ffff

    [ 3.974516] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised : Registers at 0xfeb10000 length 0x00000fff

    [ 3.975808] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Reg isters at 0xfeb20000 length 0x0000ffff

    [ 3.979449] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Regis ters at 0xfeb30000 length 0x0000ffff

    [ 3.986049] vc_sm_cma: module is from the staging directory, the quality is u nknown, you have been warned.

    [ 3.988152] bcm2835_vc_sm_cma_probe: Videocore shared memory driver

    [ 3.988168] [vc_sm_connected_init]: start

    [ 3.995583] media: Linux media interface: v0.10

    [ 3.996135] [vc_sm_connected_init]: installed successfully

    [ 4.032187] videodev: Linux video capture interface: v2.00

    [ 4.069597] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned.

    [ 4.084102] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.

    [ 4.084340] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned.

    [ 4.099348] bcm2835-codec bcm2835-codec: Device registered as /dev/video10

    [ 4.099388] bcm2835-codec bcm2835-codec: Loaded V4L2 decode

    [ 4.130909] bcm2835-codec bcm2835-codec: Device registered as /dev/video11

    [ 4.130944] bcm2835-codec bcm2835-codec: Loaded V4L2 encode

    [ 4.150747] bcm2835-codec bcm2835-codec: Device registered as /dev/video12

    [ 4.150779] bcm2835-codec bcm2835-codec: Loaded V4L2 isp

    [ 4.182501] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.

    [ 4.249745] bcm2835_audio soc:audio: card created with 8 channels

    [ 4.282260] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase

    [ 4.390302] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

    [ 4.404381] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device

    [ 4.409539] usbcore: registered new interface driver cdc_acm

    [ 4.409551] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters

    [ 4.441300] brcmfmac: F1 signature read @0x18000000=0x15264345

    [ 4.442316] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0

    [ 4.453255] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6

    [ 4.454032] usbcore: registered new interface driver brcmfmac

    [ 4.481827] [drm] No displays found. Consider forcing hotplug if HDMI is atta ched

    [ 4.481919] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc 4])

    [ 4.484454] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1

    [ 4.484467] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

    [ 4.484477] [drm] No driver support for vblank timestamp query.

    [ 4.484486] [drm] Setting vblank_disable_immediate to false because get_vblan k_timestamp == NULL

    [ 4.515191] sd 0:0:0:0: Attached scsi generic sg0 type 0

    [ 4.742080] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6

    [ 4.755866] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 2 2020 23:30:41 version 7.45.202 (r724630 CY) FWID 01-72f6ece2

    [ 6.786941] random: crng init done

    [ 6.786954] random: 7 urandom warning(s) missed due to ratelimiting

    [ 7.279040] uart-pl011 fe201000.serial: no DMA platform data

    [ 7.562335] 8021q: 802.1Q VLAN Support v1.8

    [ 7.703185] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k SSFS

    [ 7.754988] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

    [ 7.755014] brcmfmac: power management disabled

    [ 7.960000] bcmgenet: Skipping UMAC reset

    [ 8.058528] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)

    [ 8.058677] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

    [ 9.128372] bcmgenet fd580000.genet eth0: Link is Down

    [ 13.288539] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow cont rol rx/tx

    [ 13.288578] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

    [ 13.908772] Bluetooth: Core ver 2.22

    [ 13.908849] NET: Registered protocol family 31

    [ 13.908859] Bluetooth: HCI device and connection manager initialized

    [ 13.908881] Bluetooth: HCI socket layer initialized

    [ 13.908897] Bluetooth: L2CAP socket layer initialized

    [ 13.908941] Bluetooth: SCO socket layer initialized

    [ 13.918277] Bluetooth: HCI UART driver ver 2.3

    [ 13.918291] Bluetooth: HCI UART protocol H4 registered

    [ 13.918377] Bluetooth: HCI UART protocol Three-wire (H5) registered

    [ 13.918627] Bluetooth: HCI UART protocol Broadcom registered

    [ 14.060975] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

    [ 14.060981] Bluetooth: BNEP filters: protocol multicast

    [ 14.060991] Bluetooth: BNEP socket layer initialized

    [ 18.752218] tun: Universal TUN/TAP device driver, 1.6

    [ 129.487790] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k SSFS

    [ 144.041531] fuse init (API version 7.27)

    [ 202.406063] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 dr iverbyte=0x08

    [ 202.406072] sd 0:0:0:0: [sda] tag#21 Sense Key : 0x5 [current]

    [ 202.406078] sd 0:0:0:0: [sda] tag#21 ASC=0x20 ASCQ=0x0

    [ 202.406085] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 01 dc 54 00 00 02 c8 00

    [ 202.406090] print_req_error: critical target error, dev sda, sector 31216640

    [ 202.406110] sd 0:0:0:0: [sda] tag#24 UNKNOWN(0x2003) Result: hostbyte=0x00 dr iverbyte=0x08

    [ 202.406115] sd 0:0:0:0: [sda] tag#24 Sense Key : 0x5 [current]

    [ 202.406120] sd 0:0:0:0: [sda] tag#24 ASC=0x20 ASCQ=0x0

    [ 202.406126] sd 0:0:0:0: [sda] tag#24 CDB: opcode=0x2a 2a 00 01 d8 20 00 00 00 08 00

    [ 202.406130] print_req_error: critical target error, dev sda, sector 30941184

    [ 202.406138] EXT4-fs warning (device sda2): ext4_end_bio:323: I/O error 5 writ ing to inode 741 (offset 0 size 0 starting block 3867649)

    [ 202.406145] Buffer I/O error on device sda2, logical block 3801088

    [ 202.409329] EXT4-fs warning (device sda2): ext4_end_bio:323: I/O error 5 writ ing to inode 741 (offset 25165824 size 7180288 starting block 3902169)

    [ 202.409337] Buffer I/O error on device sda2, logical block 3835392

    [ 202.409346] Buffer I/O error on device sda2, logical block 3835393

    [ 202.409352] Buffer I/O error on device sda2, logical block 3835394

    [ 202.409358] Buffer I/O error on device sda2, logical block 3835395

    [ 202.409363] Buffer I/O error on device sda2, logical block 3835396

    [ 202.409369] Buffer I/O error on device sda2, logical block 3835397

    [ 202.409374] Buffer I/O error on device sda2, logical block 3835398

    [ 202.409380] Buffer I/O error on device sda2, logical block 3835399

    [ 202.409385] Buffer I/O error on device sda2, logical block 3835400

    [ 203.024633] xhci_hcd 0000:01:00.0: WARN Successful completion on short TX

    [ 203.113658] xhci_hcd 0000:01:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 11 comp_code 1

    [ 203.113666] xhci_hcd 0000:01:00.0: Looking for event-dma 0000000120e0a470 trb -start 0000000120e0a480 trb-end 0000000120e0ac70 seg-start 0000000120e0a000 seg- end 0000000120e0aff0

    [ 233.479660] sd 0:0:0:0: [sda] tag#11 uas_eh_abort_handler 0 uas-tag 3 infligh t: OUT

    [ 233.479676] sd 0:0:0:0: [sda] tag#11 CDB: opcode=0x2a 2a 00 01 d9 88 00 00 01 d8 00

    [ 233.480194] sd 0:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 2 inflight : OUT

    [ 233.480205] sd 0:0:0:0: [sda] tag#8 CDB: opcode=0x2a 2a 00 01 d9 94 00 00 04 00 00

    [ 233.519625] scsi host0: uas_eh_device_reset_handler start

    [ 233.670515] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hc d

    [ 233.710104] scsi host0: uas_eh_device_reset_handler success

    pi@raspberrypi:~ $ sudo ls -lR /dev/serial

    /dev/serial:

    insgesamt 0

    drwxr-xr-x 2 root root 60 Jun 7 12:47 by-id

    drwxr-xr-x 2 root root 60 Jun 7 12:47 by-path


    /dev/serial/by-id:

    insgesamt 0

    lrwxrwxrwx 1 root root 13 Jun 7 12:47 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B00193B1505-if00 -> ../../ttyACM0


    /dev/serial/by-path:

    insgesamt 0

    lrwxrwxrwx 1 root root 13 Jun 7 12:47 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.0 -> ../../ttyACM0

    pi@raspberrypi:~ $

  • Die Befehle mit dem "nicht funktionierenden" Stick bräuchte ich

    Mit freundlichen Grüßen Leon



    :!:Alle Fehler in diesem Post sind beabsichtigt, um den Unterhaltungswert des Inhalts für Sie zu steigern:!:


    Es gibt nichts langweiligeres als ein komplettes und funktionierendes System8o

    Kommt auch aufs: XiaomiForum



  • Tut weh das zu produzieren da ich dann wieder auf Altstand zurückfalle, aber Stromausfall sei Dank :-) hier die Ausgabe wenn der Stick nicht geht aber eingesteckt ist:


    login as: pi

    pi@10.0.0.186's password:

    Linux raspberrypi 4.19.97-v7l+ #1294 SMP Thu Jan 30 13:21:14 GMT 2020 armv7l


    The programs included with the Debian GNU/Linux system are free software;

    the exact distribution terms for each program are described in the

    individual files in /usr/share/doc/*/copyright.


    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent

    permitted by applicable law.

    Last login: Wed Jul 8 21:49:35 2020 from 10.0.0.123

    pi@raspberrypi:~ $ sudo dmesg

    [ 0.000000] Booting Linux on physical CPU 0x0

    [ 0.000000] Linux version 4.19.97-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1294 SMP Thu Jan 30 13:21:14 GMT 2020

    [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d

    [ 0.000000] CPU: div instructions available: patching division code

    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache

    [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2

    [ 0.000000] Memory policy: Data cache writealloc

    [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000

    [ 0.000000] On node 0 totalpages: 1012736

    [ 0.000000] DMA zone: 1728 pages used for memmap

    [ 0.000000] DMA zone: 0 pages reserved

    [ 0.000000] DMA zone: 196608 pages, LIFO batch:63

    [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63

    [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0

    [ 0.000000] percpu: Embedded 17 pages/cpu s36928 r8192 d24512 u69632

    [ 0.000000] pcpu-alloc: s36928 r8192 d24512 u69632 alloc=17*4096

    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

    [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008

    [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:7D:C2:47 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=abcdabcd-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

    [ 0.000000] Memory: 3735564K/4050944K available (8192K kernel code, 687K rwdata, 2408K rodata, 2048K init, 850K bss, 53236K reserved, 262144K cma-reserved, 3264512K highmem)

    [ 0.000000] Virtual kernel memory layout:

    vector : 0xffff0000 - 0xffff1000 ( 4 kB)

    fixmap : 0xffc00000 - 0xfff00000 (3072 kB)

    vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)

    lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)

    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

    .text : 0x(ptrval) - 0x(ptrval) (10208 kB)

    .init : 0x(ptrval) - 0x(ptrval) (2048 kB)

    .data : 0x(ptrval) - 0x(ptrval) ( 688 kB)

    .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB)

    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

    [ 0.000000] ftrace: allocating 28692 entries in 85 pages

    [ 0.000000] rcu: Hierarchical RCU implementation.

    [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16

    [ 0.000000] GIC: Using split EOI/Deactivate mode

    [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).

    [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns

    [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns

    [ 0.000022] Switching to timer-based delay loop, resolution 18ns

    [ 0.000249] Console: colour dummy device 80x30

    [ 0.000703] console [tty1] enabled

    [ 0.000758] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)

    [ 0.000794] pid_max: default: 32768 minimum: 301

    [ 0.001078] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [ 0.001110] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

    [ 0.001885] CPU: Testing write buffer coherency: ok

    [ 0.002309] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    [ 0.002971] Setting up static identity map for 0x200000 - 0x20003c

    [ 0.003147] rcu: Hierarchical SRCU implementation.

    [ 0.004027] smp: Bringing up secondary CPUs ...

    [ 0.004851] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

    [ 0.005790] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002

    [ 0.006689] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003

    [ 0.006824] smp: Brought up 1 node, 4 CPUs

    [ 0.006891] SMP: Total of 4 processors activated (432.00 BogoMIPS).

    [ 0.006915] CPU: All CPU(s) started in HYP mode.

    [ 0.006936] CPU: Virtualization extensions available.

    [ 0.007741] devtmpfs: initialized

    [ 0.018028] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0

    [ 0.018262] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

    [ 0.018304] futex hash table entries: 1024 (order: 4, 65536 bytes)

    [ 0.025809] pinctrl core: initialized pinctrl subsystem

    [ 0.026681] NET: Registered protocol family 16

    [ 0.029579] DMA: preallocated 1024 KiB pool for atomic coherent allocations

    [ 0.031022] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

    [ 0.031054] hw-breakpoint: maximum watchpoint size is 8 bytes.

    [ 0.031260] Serial: AMBA PL011 UART driver

    [ 0.034336] bcm2835-mbox fe00b880.mailbox: mailbox enabled

    [ 0.050028] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-02-12 12:36, variant start

    [ 0.060044] raspberrypi-firmware soc:firmware: Firmware hash is c3c8dbdf147686fb0c3f32aece709d0653368810

    [ 0.102929] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1

    [ 0.106156] vgaarb: loaded

    [ 0.106528] SCSI subsystem initialized

    [ 0.106744] usbcore: registered new interface driver usbfs

    [ 0.106811] usbcore: registered new interface driver hub

    [ 0.106893] usbcore: registered new device driver usb

    [ 0.108115] clocksource: Switched to clocksource arch_sys_counter

    [ 0.186708] VFS: Disk quotas dquot_6.6.0

    [ 0.186814] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

    [ 0.186971] FS-Cache: Loaded

    [ 0.187160] CacheFiles: Loaded

    [ 0.187687] simple-framebuffer: probe of 0.framebuffer failed with error -12

    [ 0.196694] NET: Registered protocol family 2

    [ 0.197372] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)

    [ 0.197419] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

    [ 0.197500] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

    [ 0.197585] TCP: Hash tables configured (established 8192 bind 8192)

    [ 0.197719] UDP hash table entries: 512 (order: 2, 16384 bytes)

    [ 0.197763] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

    [ 0.198000] NET: Registered protocol family 1

    [ 0.198612] RPC: Registered named UNIX socket transport module.

    [ 0.198639] RPC: Registered udp transport module.

    [ 0.198661] RPC: Registered tcp transport module.

    [ 0.198682] RPC: Registered tcp NFSv4.1 backchannel transport module.

    [ 0.198710] PCI: CLS 0 bytes, default 64

    [ 0.201688] Initialise system trusted keyrings

    [ 0.201869] workingset: timestamp_bits=14 max_order=20 bucket_order=6

    [ 0.210903] FS-Cache: Netfs 'nfs' registered for caching

    [ 0.211433] NFS: Registering the id_resolver key type

    [ 0.211475] Key type id_resolver registered

    [ 0.211496] Key type id_legacy registered

    [ 0.211527] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

    [ 0.213798] Key type asymmetric registered

    [ 0.213823] Asymmetric key parser 'x509' registered

    [ 0.213946] bounce: pool size: 64 pages

    [ 0.213999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

    [ 0.214187] io scheduler noop registered

    [ 0.214211] io scheduler deadline registered (default)

    [ 0.214390] io scheduler cfq registered

    [ 0.214413] io scheduler mq-deadline registered (default)

    [ 0.214436] io scheduler kyber registered

    [ 0.245595] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000

    [ 0.245641] brcm-pcie fd500000.pcie: could not get clock

    [ 0.245716] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:

    [ 0.245768] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000

    [ 0.298144] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)

    [ 0.298443] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00

    [ 0.298474] pci_bus 0000:00: root bus resource [bus 00-01]

    [ 0.298504] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])

    [ 0.298567] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400

    [ 0.298707] pci 0000:00:00.0: PME# supported from D0 D3hot

    [ 0.301429] PCI: bus0: Fast back to back transfers disabled

    [ 0.301460] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

    [ 0.301682] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330

    [ 0.301807] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]

    [ 0.302123] pci 0000:01:00.0: PME# supported from D0 D3cold

    [ 0.304869] PCI: bus1: Fast back to back transfers disabled

    [ 0.304899] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01

    [ 0.304946] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]

    [ 0.304980] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]

    [ 0.305068] pci 0000:00:00.0: PCI bridge to [bus 01]

    [ 0.305097] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]

    [ 0.305328] pcieport 0000:00:00.0: enabling device (0140 -> 0142)

    [ 0.305510] pcieport 0000:00:00.0: Signaling PME with IRQ 53

    [ 0.305692] pcieport 0000:00:00.0: AER enabled with IRQ 53

    [ 0.305874] pci 0000:01:00.0: enabling device (0140 -> 0142)

    [ 0.309970] iproc-rng200 fe104000.rng: hwrng registered

    [ 0.310205] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)

    [ 0.310717] vc-sm: Videocore shared memory driver

    [ 0.311118] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000

    [ 0.321350] brd: module loaded

    [ 0.330969] loop: module loaded

    [ 0.331729] Loading iSCSI transport class v2.0-870.

    [ 0.333440] libphy: Fixed MDIO Bus: probed

    [ 0.333874] bcmgenet fd580000.genet: failed to get enet clock

    [ 0.333904] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000

    [ 0.333935] bcmgenet fd580000.genet: failed to get enet-wol clock

    [ 0.333965] bcmgenet fd580000.genet: failed to get enet-eee clock

    [ 0.334001] bcmgenet: Skipping UMAC reset

    [ 0.334239] unimac-mdio unimac-mdio.-19: DMA mask not set

    [ 0.348145] libphy: bcmgenet MII bus: probed

    [ 0.388651] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)

    [ 0.389599] usbcore: registered new interface driver r8152

    [ 0.389680] usbcore: registered new interface driver lan78xx

    [ 0.389752] usbcore: registered new interface driver smsc95xx

    [ 0.390070] xhci_hcd 0000:01:00.0: xHCI Host Controller

    [ 0.390114] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1

    [ 0.392357] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890

    [ 0.392699] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54

    [ 0.393566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19

    [ 0.393599] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [ 0.393628] usb usb1: Product: xHCI Host Controller

    [ 0.393651] usb usb1: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd

    [ 0.393675] usb usb1: SerialNumber: 0000:01:00.0

    [ 0.394198] hub 1-0:1.0: USB hub found

    [ 0.394293] hub 1-0:1.0: 1 port detected

    [ 0.394774] xhci_hcd 0000:01:00.0: xHCI Host Controller

    [ 0.394810] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2

    [ 0.394846] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed

    [ 0.395220] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19

    [ 0.395252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [ 0.395280] usb usb2: Product: xHCI Host Controller

    [ 0.395303] usb usb2: Manufacturer: Linux 4.19.97-v7l+ xhci-hcd

    [ 0.395326] usb usb2: SerialNumber: 0000:01:00.0

    [ 0.395814] hub 2-0:1.0: USB hub found

    [ 0.395903] hub 2-0:1.0: 4 ports detected

    [ 0.397118] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

    [ 0.397323] dwc_otg: FIQ enabled

    [ 0.397332] dwc_otg: NAK holdoff enabled

    [ 0.397341] dwc_otg: FIQ split-transaction FSM enabled

    [ 0.397353] Module dwc_common_port init

    [ 0.397569] usbcore: registered new interface driver uas

    [ 0.397681] usbcore: registered new interface driver usb-storage

    [ 0.397880] mousedev: PS/2 mouse device common for all mice

    [ 0.399101] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

    [ 0.400545] sdhci: Secure Digital Host Controller Interface driver

    [ 0.400570] sdhci: Copyright(c) Pierre Ossman

    [ 0.400978] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe

    [ 0.401394] sdhci-pltfm: SDHCI platform and OF driver helper

    [ 0.404444] ledtrig-cpu: registered to indicate activity on CPUs

    [ 0.404617] hidraw: raw HID events driver (C) Jiri Kosina

    [ 0.404752] usbcore: registered new interface driver usbhid

    [ 0.404775] usbhid: USB HID core driver

    [ 0.405552] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0

    [ 0.407313] [vc_sm_connected_init]: start

    [ 0.416208] [vc_sm_connected_init]: end - returning 0

    [ 0.417374] Initializing XFRM netlink socket

    [ 0.417417] NET: Registered protocol family 17

    [ 0.417517] Key type dns_resolver registered

    [ 0.417784] Registering SWP/SWPB emulation handler

    [ 0.418429] registered taskstats version 1

    [ 0.418460] Loading compiled-in X.509 certificates

    [ 0.425405] uart-pl011 fe201000.serial: cts_event_workaround enabled

    [ 0.425486] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2

    [ 0.430629] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver

    [ 0.431185] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver

    [ 0.431834] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0

    [ 0.431860] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated

    [ 0.457911] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3

    [ 0.458020] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4

    [ 0.476241] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

    [ 0.477864] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.479487] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.482375] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

    [ 0.483992] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

    [ 0.488156] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA

    [ 0.490545] of_cfs_init

    [ 0.490720] of_cfs_init: OK

    [ 0.491353] Waiting for root device PARTUUID=abcdabcd-02...

    [ 0.537155] random: fast init done

    [ 0.591163] mmc0: new ultra high speed DDR50 SDHC card at address aaaa

    [ 0.592390] mmcblk0: mmc0:aaaa SM32G 29.7 GiB

    [ 0.593132] mmc1: new high speed SDIO card at address 0001

    [ 0.594623] mmcblk0: p1 p2

    [ 0.768159] usb 1-1: new high-speed USB device number 2 using xhci_hcd

    [ 0.950763] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21

    [ 0.950798] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

    [ 0.950824] usb 1-1: Product: USB2.0 Hub

    [ 0.952356] hub 1-1:1.0: USB hub found

    [ 0.952644] hub 1-1:1.0: 4 ports detected

    [ 1.138475] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd

    [ 1.175437] usb 2-2: New USB device found, idVendor=2109, idProduct=0715, bcdDevice= 1.48

    [ 1.175472] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

    [ 1.175499] usb 2-2: Product: VLI Product String

    [ 1.175523] usb 2-2: Manufacturer: VLI Manufacture String

    [ 1.175547] usb 2-2: SerialNumber: 000000012345

    [ 1.195337] scsi host0: uas

    [ 1.213024] scsi 0:0:0:0: Direct-Access WDC WDS5 00G2B0B-00YS X611 PQ: 0 ANSI: 6

    [ 1.216267] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)

    [ 1.216470] sd 0:0:0:0: [sda] Write Protect is off

    [ 1.216499] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00

    [ 1.216845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

    [ 1.217656] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes

    [ 1.278159] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd

    [ 1.292971] sda: sda1 sda2

    [ 1.296916] sd 0:0:0:0: [sda] Attached SCSI disk

    [ 1.302761] EXT4-fs (sda2): INFO: recovery required on readonly filesystem

    [ 1.302790] EXT4-fs (sda2): write access will be enabled during recovery

    [ 1.416886] usb 1-1.4: New USB device found, idVendor=0451, idProduct=16a8, bcdDevice= 0.09

    [ 1.416921] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

    [ 1.416950] usb 1-1.4: Product: TI CC2531 USB CDC

    [ 1.416974] usb 1-1.4: Manufacturer: Texas Instruments

    [ 1.416997] usb 1-1.4: SerialNumber: __0X00124B00193B1505

    [ 1.588245] EXT4-fs (sda2): orphan cleanup on readonly fs

    [ 1.630298] EXT4-fs (sda2): 18 orphan inodes deleted

    [ 1.630329] EXT4-fs (sda2): recovery complete

    [ 1.639289] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

    [ 1.639360] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.

    [ 1.642783] devtmpfs: mounted

    [ 1.650525] Freeing unused kernel memory: 2048K

    [ 1.668378] Run /sbin/init as init process

    [ 1.867105] systemd[1]: System time before build time, advancing clock.

    [ 1.885825] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)

    [ 1.886525] systemd[1]: Detected architecture arm.

    [ 1.898253] systemd[1]: Set hostname to <raspberrypi>.

    [ 2.507824] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.522044] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.522687] systemd[1]: Listening on Journal Socket (/dev/log).

    [ 2.523459] random: systemd: uninitialized urandom read (16 bytes read)

    [ 2.524045] systemd[1]: Listening on Journal Socket.

    [ 2.533663] systemd[1]: Mounting POSIX Message Queue File System...

    [ 2.536352] systemd[1]: Created slice User and Session Slice.

    [ 2.537232] systemd[1]: Listening on initctl Compatibility Named Pipe.

    [ 2.537764] systemd[1]: Reached target Swap.

    [ 2.545574] systemd[1]: Starting Load Kernel Modules...

    [ 3.205724] EXT4-fs (sda2): re-mounted. Opts: (null)

    [ 3.286946] systemd-journald[109]: Received request to flush runtime journal from PID 1

    [ 6.607603] random: crng init done

    [ 6.607615] random: 7 urandom warning(s) missed due to ratelimiting

    [ 6.713971] uart-pl011 fe201000.serial: no DMA platform data

    [ 6.813792] bcmgenet: Skipping UMAC reset

    [ 6.884933] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS

    [ 6.918616] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)

    [ 7.928222] bcmgenet fd580000.genet eth0: Link is Down

    [ 12.088395] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

    pi@raspberrypi:~ $ sudo ls -lR /dev/serial

    ls: Zugriff auf '/dev/serial' nicht möglich: Datei oder Verzeichnis nicht gefunden

    pi@raspberrypi:~ $