hier ist mein Profil
Ich ändere aber vor jedem Druck die Einstellungen von gewissen Parametern
Moin ,
könntest du bitte dein Profil für Cura nochmal ein stellen, ich kann es nicht sehen in deinen Kommentar.
Danke und weiter so
hier ist mein Profil
Ich ändere aber vor jedem Druck die Einstellungen von gewissen Parametern
Moin ,
könntest du bitte dein Profil für Cura nochmal ein stellen, ich kann es nicht sehen in deinen Kommentar.
Danke und weiter so
Okay,
Hier einmal mein Start Code...
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 X5.0 Y5.0 F7200 ; Fahre in Ausgangsposition
G1 Z0.1 ; Nozzle senken um 0,1
G1 X5.0 F7200 ; Material abstreifen
G1 Z0.2 ; Hebe Nozzle an auf 0,2mm
G1 X150 E20 F600 ;Linie ziehen
G92 E0 ;zero the extruded length
G1 F200 E2 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
M117 ;Printing...
G5
Alles anzeigen
Mein End Code...
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
G1 Y170
M84 ;steppers off
G90 ;absolute positioning
Und natürlich auch mein Cura Profil...
SchimmerMediaHD_Cura.curaprofileIch hoffe damit konnte ich weiterhelfen