Hallo, wollte gerade mal schauen ob der Sonoff mir nach dem Flashen auch als WLAN Netzwerk angezeigt wird, so wie beim "mafe68".
Nur leider habe ich jetzt wieder ein anderes Problem. Und Zwar bekomme ich jetzt folgende Fehlermeldung
Archiving built core (caching) in: C:\Users\...\AppData\Local\Temp\arduino_cache_385228\core\core_esp8266_esp8266_generic_CpuFrequency_80,ResetMethod_nodemcu,CrystalFreq_26,FlashFreq_40,FlashMode_dout,FlashSize_1M0,led_2,LwIPVariant_Prebuilt,Debug_Disabled,DebugLevel_None____,FlashErase_none,UploadSpeed_512000_e167f88979c77d372eaa58804cb6c70f.a
Der Sketch verwendet 569073 Bytes (55%) des Programmspeicherplatzes. Das Maximum sind 1023984 Bytes.
Globale Variablen verwenden 57812 Bytes (70%) des dynamischen Speichers, 24108 Bytes für lokale Variablen verbleiben. Das Maximum sind 81920 Bytes.
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_send_command: wrong direction/command: 0x01 0x00, expected 0x01 0x08
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
error: espcomm_upload_mem failed
Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
Alles anzeigen
Hatte diese Problem nach unzähligen Versuchen den Sonoff zu Flashen mit einem altem FTDI Board. Dann habe ich mir ein neues Bestellt und zack es hat wieder einwandfrei funktioniert, und jetzt nach einigen versuchen, wieder das selbe Problem Kann ja nicht sein das dieses Teil nur ein Paar Flash Vorgänge aushält und dann abraucht.
Hatte jemand vielleicht auch schon dieses Problem und eine Idee wie man es lösen kann oder ist Tatsächlich das FTDI Board kaputt ?!
Gruß Lars